DIY Electric Skateboard Motor In Chrome (6380/170kv) Sold Out On Retail Site

• Popularity - 1571 views, 224.4 views per day, 7 days on eBay. Super high amount of views. 20 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Chrome Electric Skateboard Motor (6380 170kv).<br>Connecting ports need to be soddered together but is not a tough task at all. This motor specifically is sold out on the retail site and is very desirable by fellow esk8 riders. Made for someone building a DIY BOARD.<br>Fits a 63mm motor mount<br>This motor is a beast with 4100 watts<br>80 amps max<br>12s volts max<br>5.06Nm max torque<br>170kv max rpm (voltage)<br>Motor weight 2.25lbs<br>Motor shaft - shadt bote diameter 8mm, 41.5 mm length.<br>Motor wire - 150mm silicone 12awg wire<br>NEEDS 5.5mm GOLD BULLET CONNECTOR FEMALE<br>Wire config.<br>Blue = A<br>Black = B<br>Yellow = C<br>Sensor wire - standard rc sensor wire JST - ZH 6pin 1.5mm pitch<br>Internal pcb with 120 degree hall effect sensors<br>Motor can be used with or without A sensor. Sensor less operation is most common.<br>VESC sensor wires required to use with VESC.<br>Wire configuration:<br>Red equals 5V<br>White equals temp<br>Blue equals a<br>Yellow equals C<br>Green equals B<br>Black equals GND<br>Any additional questions please dm god bless.